Battery maintenance 3 Mistakes
Misunderstanding 1: notebook lithium battery maintenance should follow the basic principles of exhaustion filled.<br><br>
This is perhaps the most we see the maintenance of the principle, Oh, gateway btp-51b3 battery this is in fact the most fundamental of the erroneous views, the simple analysis of the production is estimated that this principle is the original nickel-metal hydride batteries and maintenance methods to copy the copy, so that if the principle of in order to minimize battery memory effect, for those early notebook batteries (Ni-MH or Ni-Cd) has a good protective effect, but the current mainstream notebook is equipped with lithium batteries will have the possibility of injury. Li-ion battery is no memory effect, which is the major vendors will be publicized when the instructions for the user, in fact not the case, lithium battery material is an active substance, the material for the temperature, the use of frequency, and so conditions are very sensitive, when the battery life after a period of time, there would be an aging phenomenon, the performance of the most intuitive to use less time, why is it so what? The natural wear and tear is one of the important reasons, but be careful not realize their own care are also an important reason for this phenomenon, over-charging and over-discharge the battery will be the rapid reduction activity, although the user to maintain in the process of discharging and charging is far from over not over the standard (because of the internal lithium battery protection circuit, the full protection of excessive charge and discharge), but there are no user thought of himself surrounded by such a phenomenon, sometimes WINDOWS next show there are 20% of battery capacity, you can use 30 minutes, but suddenly what the machine automatically shut down, and confused at the same time ask masters, masters will tell you this is because the battery has been aging, the battery protection circuit monitors the battery can no longer be a good real capacity, why is this so? I have to tell you with the truth, everyone would have guessed that such a protection circuit in the end how much credibility? Just mentioned phenomenon is the excessive discharge of the performance of one of the most intuitive, what I say here can completely break a conceptual error: the normal cells in everyday wear and tear, gateway 8msbg battery the protection circuit will be increasingly inaccurate at this time if you also insisted on fully charge and discharge the maintenance of principle, then I believe this piece of battery life has been around the corner, then there is no such visual performance when there is no damage to the battery do? The author in this noncommittal, but I hope you took into account the reasons mentioned above, whether the automatic power-down is only natural wear and tear factor inside.<br><br>
Therefore, in this writer to provide a proper maintenance of the principle of one:<br><br>
Deliberately do not require the use of the process of charge to 100%, used in automatic shutdown to maintain such a way, but the best to use about 20% began to charge, charge 98% or so can stop charging (eager to use the case, the author not opposed to fully charged), will not have the battery damage, if the machine has the power calibration procedure, then can choose to 1-2 months, once corrected, so that protection circuit to fully play a role.<br><br>
Misunderstanding 2: The new lithium batteries need to buy 3 times the activity can be fully charged to fully activate the<br><br>
If you can accept my point of view mentioned above, you'll probably think this is the point of view is nonsense. Activation? Li-ion battery when the factory in order to avoid damage to the natural wear and tear on the battery, all with a certain amount of power, so that the work of fully activated in the factory have been completed within the (activation process must be in the absence of protection circuits exist to complete), try to Imagine, lithium battery protection circuit with the circuit itself, the purpose of this piece of the circuit is to avoid excessive charge and discharge the battery, then you use the protection circuits for lithium batteries for up to 10 hours of charging, Oh, how ridiculous things, when the charging light lights went out, had refused to charge the battery, you no longer stuck in plugs can be washed into the trace of electricity, so that activating one that is even more ridiculous, fully apply a set of nickel-metal hydride batteries, and live a statement of responsibility. dell xps m1730 battery In order to verify the author of this statement, you can install a software called BATTERY MON, when the charging light went out when the battery case in his column on the state of the battery can be seen, but no charge for on-line. There is also a more intuitive approach, when the rechargeable battery will be hot, when you are shining the manufacturer's instructions and then charge 10 hours after you touch the battery, hot? In other words, if you really want to charge 10 hours to activate, then, and really be able to charge more than 10 hours electric power, then even a slow charging, the battery has exploded.<br><br>
This is perhaps the most we see the maintenance of the principle, Oh, gateway btp-51b3 battery this is in fact the most fundamental of the erroneous views, the simple analysis of the production is estimated that this principle is the original nickel-metal hydride batteries and maintenance methods to copy the copy, so that if the principle of in order to minimize battery memory effect, for those early notebook batteries (Ni-MH or Ni-Cd) has a good protective effect, but the current mainstream notebook is equipped with lithium batteries will have the possibility of injury. Li-ion battery is no memory effect, which is the major vendors will be publicized when the instructions for the user, in fact not the case, lithium battery material is an active substance, the material for the temperature, the use of frequency, and so conditions are very sensitive, when the battery life after a period of time, there would be an aging phenomenon, the performance of the most intuitive to use less time, why is it so what? The natural wear and tear is one of the important reasons, but be careful not realize their own care are also an important reason for this phenomenon, over-charging and over-discharge the battery will be the rapid reduction activity, although the user to maintain in the process of discharging and charging is far from over not over the standard (because of the internal lithium battery protection circuit, the full protection of excessive charge and discharge), but there are no user thought of himself surrounded by such a phenomenon, sometimes WINDOWS next show there are 20% of battery capacity, you can use 30 minutes, but suddenly what the machine automatically shut down, and confused at the same time ask masters, masters will tell you this is because the battery has been aging, the battery protection circuit monitors the battery can no longer be a good real capacity, why is this so? I have to tell you with the truth, everyone would have guessed that such a protection circuit in the end how much credibility? Just mentioned phenomenon is the excessive discharge of the performance of one of the most intuitive, what I say here can completely break a conceptual error: the normal cells in everyday wear and tear, gateway 8msbg battery the protection circuit will be increasingly inaccurate at this time if you also insisted on fully charge and discharge the maintenance of principle, then I believe this piece of battery life has been around the corner, then there is no such visual performance when there is no damage to the battery do? The author in this noncommittal, but I hope you took into account the reasons mentioned above, whether the automatic power-down is only natural wear and tear factor inside.<br><br>
Therefore, in this writer to provide a proper maintenance of the principle of one:<br><br>
Deliberately do not require the use of the process of charge to 100%, used in automatic shutdown to maintain such a way, but the best to use about 20% began to charge, charge 98% or so can stop charging (eager to use the case, the author not opposed to fully charged), will not have the battery damage, if the machine has the power calibration procedure, then can choose to 1-2 months, once corrected, so that protection circuit to fully play a role.<br><br>
Misunderstanding 2: The new lithium batteries need to buy 3 times the activity can be fully charged to fully activate the<br><br>
If you can accept my point of view mentioned above, you'll probably think this is the point of view is nonsense. Activation? Li-ion battery when the factory in order to avoid damage to the natural wear and tear on the battery, all with a certain amount of power, so that the work of fully activated in the factory have been completed within the (activation process must be in the absence of protection circuits exist to complete), try to Imagine, lithium battery protection circuit with the circuit itself, the purpose of this piece of the circuit is to avoid excessive charge and discharge the battery, then you use the protection circuits for lithium batteries for up to 10 hours of charging, Oh, how ridiculous things, when the charging light lights went out, had refused to charge the battery, you no longer stuck in plugs can be washed into the trace of electricity, so that activating one that is even more ridiculous, fully apply a set of nickel-metal hydride batteries, and live a statement of responsibility. dell xps m1730 battery In order to verify the author of this statement, you can install a software called BATTERY MON, when the charging light went out when the battery case in his column on the state of the battery can be seen, but no charge for on-line. There is also a more intuitive approach, when the rechargeable battery will be hot, when you are shining the manufacturer's instructions and then charge 10 hours after you touch the battery, hot? In other words, if you really want to charge 10 hours to activate, then, and really be able to charge more than 10 hours electric power, then even a slow charging, the battery has exploded.<br><br>
ReportReport this topic to moderators FlagFlag as not safe for work.
Views: 26
RATE
-3
Posted: 2010-01-15 23:45:54
Psst.
